16GB 2933MHZ DDR4 NON-ECC CL21 DIMM 1RX8

Product may vary from image.
Rely only on description for purchasing decisions.

Product ID: 256353 Product Code: KVR29N21S8/16

$133 ^.06

Qty:

6 in stock

Usually ships within 24 hours

Delivery from $16.00

Add to favourites

Please login first.

This document describes ValueRAM's KVR29N21S8/16 is a 2G x

64-bit (16GB) DDR4-2933 CL21 SDRAM (Synchronous DRAM), 1Rx8,

memory module, based on eight 2G x 8-bit FBGA components. The

SPD is programmed to JEDEC standard latency DDR4-2933 timing of

21-21-21 at 1.2V. Each 288-pin DIMM uses gold contact fingers.

FEATURES:

• Power Supply: VDD = 1.2V Typical

• VDDQ = 1.2V Typical

• VPP = 2.5V Typical

• VDDSPD = 2.2V to 3.6V

• Nominal and dynamic on-die termination (ODT) for

data, strobe, and mask signals

• Low-power auto self refresh (LPASR)

• Data bus inversion (DBI) for data bus

• On-die VREFDQ generation and calibration

• Single-rank

• On-board I2 serial presence-detect (SPD) EEPROM

• 16 internal banks; 4 groups of 4 banks each

• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)

• Selectable BC4 or BL8 on-the-fly (OTF)

• Fly-by topology

• Terminated control command and address bus

• PCB: Height 1.23” (31.25mm)

• RoHS Compliant and Halogen-Free

kvr29n21s8_16.pdf